Home
High Seas Pirate Ship Bed - $1,500

Bed size: Twin (mattress not included)

Bed w/Mast (L x W x H): 10'-3" x 3'-5.5" x 7'

Bed w/o Mast (L x W x H): 10'-3" x 3'-5.5" x 3'-1"

Side Gun Rails 29' (H), Side Rails 19.5" (H)

Each bed is comprised of the best veneers and solid woods.

For Exterior woods: American select pine as both veneers on the bow and stern and solid pine on the side rails and frames for the drawers or trundle options.

The bed is composed of 3 sections: Bow, Stern and mid-ship section is a knock down due to shipping issues. See instructions for assembly

Bow (footboard) Like it's real daddy ships, the bow is curved both from side to point and curved down from the gun rail center to the keel - necessary to cut through those rough waters ahead. The inside deck of the bow is level with a 10" mattress. (9' to pillow-top is recommended). There are two deck compartments, left and right sides, flush with the deck (somewhat concealed) and opened with a finger hole in the lids. And the first centerpiece for the bed is the ship's wheel. The ship's wheel spins left and right freely where a boy can stand on the bow and or the mattress edge and command the roughest of adventures in the mightiest of storms and heartiest of seas.

Stern (headboard): Not wasting space, there are 3 sock drawers on each side of the stern. We've included 2 drawers in the headboard below the deck and above the mattress. The upper deck of the stern is set perfectly for pictures, books and various decorative things.

At the center of the deck and stern is a mast rising up to a heigh of 84" from the floor to the tip, but is adjustable for ceiling heights greater than 8'. The width of the crossbeam of the mast is equal to the sides of the ship and comes with a specially designed spring and bolt so that the crossbeam, when pulled upon, will swing down and out of the joint in the mast. And no, we didn't forget the crow's nest that slips over the top of the mast, the ideal place for small pirate figurines, parrots, etc.

Above that, is a pennant of wood that the buyer can hand paint his or her little pirate's name. the sail drapes down from the crossbeam to just 13" above the deck. The sail is made of a canvas material and includes an imprinted map. Aside from some of the names on the map, the little pirate can draw his/her own treausre route and mark the spot with an X.

Back down the sides of the stern, there is a window on each side that lights up and require 12 volt candelabra light bulbs easily found in Home Depot or Lowes. Each plastic window has four panes, and we include five colors that can be interchanged with yellow, red, blue, green and frosted white.

Mid-Ship (side rails and components): The side rails are made up of solid wood. There is a facade below the side rails that comes standard with the bed. Both sides of the bed have fake drawers with handles that mimic cannons coming out of a port hole and door. The handles are painted black. Each drawer face in the standard model, opens on a hinge top allow for storage under the bed, or more likely for that little hideaway for any little pirate's treasure. It's perfectly safe, because the mattress can always be lifted up for access below.

Trundle/Storage Drawers Option: The side frame for the facade of drawer faces can be detached from the actual bed and reattached to a trundle "box". this allows the user to move the trundle to either side for a sleepover. Increasing storage space is simple. The storage drawer option is a self-sustaining/supporting box houses the drawer boxes with slides. In this case, however, do not detach the fram from the bed, but detach each fake drawer from the frame and attach to the drawer boxes. The supporting box for the drawers are mounted to the frame from the inside. You can put up to two sets of storage drawers in a bed.

Make-Up and Colors:

The bed is made up of hardwoods (Acacia species) and high -density MDF Veneers. We are offering 2 colors of stains right now, but are open to adding more colors in the future. The options are a 1) deep red cherry look and 2) is a deep dark chocolate. We are looking into creating a "beat up" version as well.

As with all of our products, we do offer custom colors. There is a fee for this, and customers can provide paint samples from stores such as Home Depot, Lowest etc. Simply tell us the number, and we'll pick one up and match it. There is an 8 to 12 week time frame on special colors or paints that depends on the timing of the order with each batch of beds being produced.

All Case goods:

Carefully crafted, each casegood fits the bed but is also cost effective. we are currently working on a dresser, nightstand and treasure chest/toy chest, and should have these available in the Summer of 2008. More details will follow.

All case goods are a mix of solid wood and veneers. All drawer faces, top surfaces and decorative profiles are made in veneer just as large flat surfaces use the veneers, an excellent choice for strength and smooth texture after painting. In addition, each drawer "box" is made from solid wood and unfinished and uses dovetail joints for expert craftsmanship, the best and strongest joints made, and mounted on metal sliders. All case goods are stained and lacquered in matching colors.

Note:Specifications are subject to changes without notice and at the discretion of the manufacturer.

To purchase this bed contact us directly at (585) 905-8903 or email your zip code with any questions you have to customerservice@castlebeds.com

Pre-ordering available for March 1st, first shipments to hit land start in July. Be the first to own this spectacular heirloom bed.

Contact Us at (585) 905-8903

Monday through Friday 9:00a.m. to 5:00 p.m. E.S.T.

customerservice@castlebeds.com